360training.com

Transmission

Our Transmission Training Series provides a modular approach to technical training, aimed at all personnel who are involved in plant maintenance including operators, maintenance technicians, craftsmen and management. Our Objective is to present techniques used in modern plants to measure on an ongoing basis, the rate of deterioration of equipment, analysis and interpretation of such information, and the resultant implementation of predictive maintenance.  Download Transmission Curriculum Here

Condition Monitoring
This program is aimed at all personnel who are involved in plant maintenance including operators, maintenance technicians, craftsmen and management. Our Objective is to present techniques used in modern plants to measure on an ongoing basis, the rate of deterioration of equipment, analysis and interpretation of such information, and the resultant implementation of predictive maintenance.

Electrical Relay Test & Maintenance
Each module deals with specific relays produced by individual manufacturers. Each lesson is divided into two parts. (A) The fundamental operating principles, typical applications and connections for the specific type of relay. (B) Illustrates typical test, including: zero check, minimum pickup, timing tests, insulation tests, and seal-in circuit tests. Preventative maintenance procedures are also reviewed.

Electrical Troubleshooting Skills
This series of award winning interactive CD ROM training programs are ideal for learning proven troubleshooting techniques and applying them in a very realistic simulated environment.

Electric Utility Management
A dynamic Training Program encompassing all aspects of utility management activities and objectives including operation, financial control, regulatory compliance, and structure to cope with recent industry trends.

Electrical Fundamentals
This series will provide you with an overall understanding of Electrical Fundamentals including Ohms Law, AC Circuits, Transformers and Three Phase Systems.

Meter Technician Training
This program will train personnel to maintain, calibrate, install, and troubleshoot various power measuring devices.

Power Quality
This program is designed to aid in upgrading one’s technical knowledge and understanding of power quality issues. The basic parameters of power quality, the problems caused by different types of electrical equipment and ways of mitigating the problem are covered. The program is focused at the technician/operator level.

Power System Harmonics
This program is designed to familiarize engineers in the utility and industrial sectors with the fundamentals of harmonic distortion. The causes, systems parameters, operating conditions and equipment related to harmonic distortion are examined. Emphasis is then shifted to problem analysis and measurement, mitigation techniques and industry standards. The knowledge gained is then applied in some actual case studies.

Power System Operation
Upon completion of this program the technician will understand the concepts and technology of electric power system operation and dispatch. Particular attention is given to emergency situations and system recovery.

System Protection Technology
This program will train personnel on the principles of protection systems, including different schemes used in the protection of: generators, buses, transmission & distribution lines, transformers, motors, etc.

Transformer Station Interactive Simulation Software
Developed by Ontario Hydro, the Transformer Station Simulator uses a Dual Element Spot Network(DESN) arrangements as a model. The two station buses are supplied by two power transformers (each having two secondary windings). One secondary winding from each transformer is connected to one bus while the second winding from each transformer is connected to the other bus. This 230 kV transformer station is normally operated with an open bus tie breaker to limit available fault current. The station has 6 feeders and 2 capacitor banks.

Transmission System Operation
The program is aimed principally at power system operators in the new ISO and power pools. However, we also expect interest from the new entrants to the power business such as brokers, traders, and independent generators. For this reason a certain amount of necessary standard practice material is included in the program to provide a base on which to build the more advanced techniques.

Applying NERC Standards
This course is designed to provide you with a practical understanding of what each standard is about as the standards are applied to assignments during each lesson.

Throughout the course, you will have access to the full-text version of the NERC standards. You will have the opportunity to review the requirements of each standard before being challenged to apply your knowledge of those standards during the examination provided at the end of the course

Controlling to NERC Standards
The objective of “System Control” is to bring about an orderly flow of power from the generating source to the load (power consumer) while maintaining the utmost level of safety, reliability and stability throughout the system.
This course discusses the requirements and procedures of “System Control” and the relationships of these requirements and procedures to applicable NERC Standards.

Emergency Table Top Drill
Each Emergency Table-Top Simulation/Drill scenario is credited CEH time based on the same events used in actual on-site emergency training. The NERC/WECC Emergency Table-Top On-site Simulation/Drill course includes 13 Table-Top On-Site Simulation/Drill scenarios.

During each Table-Top Simulation/Drill scenario, you will be provided time to read the given information before you begin your response to the training event. After carefully preparing your response to the scenario in your “log” you will be provided with time to compare your responses with the basic expectations for such an event.

Grid Dynamics Series
Who benefits: Balancing Area Operators and Personnel; Power System Operators and Personnel; Utility Operators and Personnel; Balancing Area Operators and Personnel; Power Systems Repair and Maintenance Personnel; Dispatch Personnel; Reliability Coordinators; Balancing Authority Area Personnel; Transmission Operators.

System Operations Review
Also intended for NERC Certification Prep. If taken as a refresher by one who is already NERC certified, the following hours can be granted (12 NERC CE Hours/ 4 NERC Standard Hours/8 EOP Hour

The NERC OPERATIONS TRAINING MODULE is designed to provide a comprehensive general review for personnel seeking CE training credit as well as for those persons who are preparing to take the NERC certification exam.