NFPA 70E for work practices is designed to avoid injury from a release of electrical energy and help to prevent or minimize exposure to all widely recognized electrical hazards. This online course is intended for use by owners, contractors, employers, safety directors and trainers, managers, Personal Protective Equipment (PPE) buyers, electrically qualified workers and unqualified employees who need to protection against electrical hazards in the workplace.
The course provides a summary of the major changes to the previous 2009 NFPA 70E in the 2012 edition, and is designed be used in conjunction with a hard copy of the NFPA 70E. We recommend that you use the published standard for reference, particularly to review large tables that cannot be displayed in the course screen due to their size.
At the end of this program, you should be able to:
- Describe the major changes made in Article 90 and Chapter 1 of the 2012 NFPA 70E edition.
- Describe how to establish an electrically safe work condition; electric shock, arc flash, arc blast; personal protective equipment (PPE); approach boundaries; flash protection boundary; and, working "on" or "near" live parts.
- Describe the elements of an electrical safety program, including program principles, controls and procedures; hazard/risk evaluation; job briefings; and training requirements for single-employer sites and multi-employer sites, and for qualified and unqualified persons.
- Explain the proper use of test instruments and equipment, portable electric equipment, overcurrent protection, and lockout/tagout procedures and equipment.
- Distinguish the major types of electrical hazards and the Personal Protective Equipment that is selected to reduce injuries.
- Describe the major changes in Chapter 2 and 3 in the 2012 NFPA 70E edition.
- Describe safety-related maintenance requirements for electrical equipment and installations in workplaces.
- Describe safety requirements for special equipment.
ARTICLE 90 - Introduction
90.1 - Purpose
90.2 - Scope
90.3 - Standard Arrangement
90.5 - Mandatory Rules, Permissive Rules, and Explanatory Material
CHAPTER 1 - Safety-Related Work Practices
ARTICLE 100 - Definitions
ARTICLE 105 - Application of Safety-Related Work Practices
ARTICLE 110 - General Requirements for Electrical Safety-Related Work Practices
ARTICLE 120 - Establishing an Electrically Safe Work Condition
ARTICLE 130 - Work Involving Electrical Hazards
CHAPTER 2 - Safety Related Maintenance Requirements
ARTICLE 200 - lntroduction
ARTICLE 205 - General Maintenance Requirements
CHAPTER 3 - Safety Requirements for Special Equipment
ARTICLE 310 - Safety-Related Work Practices for Electrolytic Cells
ARTICLE 320 - Safety Requirements Related to Batteries and Battery Rooms
ARTICLE 340 - Safety-Related Work Practices: Power Electronic Equipment
NFPA 70E - Florida Department of Business and Professional Regulation Electrical Contractors Licensing Board
- Florida Department of Business and Professional Regulation Electrical Contractors Licensing Board
- Website URL:
- Email Address:
- 1940 North Monroe Street
End of Course Instructions
Upon successful completion of the course, you will be able to print a certificate of completion from your training page.
Got questions? Contact us below or call 877-881-2235
Why Choose 360training.com?
- Fast and easy courses completion
- Get an education faster than at traditional colleges!
- 100% online - No classroom attendance required.
- Unlimited 24x7 online customer support
- Over 500,000+ certified nationwide.