New Mexico 2114 - Fault Investigation and Analysis

2114 - Fault Investigation and Analysis

85.00 85.00
$85.00
PRICE PER USER
$
X
USERS


=
SUBTOTAL
$
  • Course Delivery: On Demand
  • Duration: 4 

Chat Live | Contact Us | Toll Free: (888) 360-8764

 

Description

The objective of this videotape is to demonstrate the various methods that are used to investigate equipment performance during fault conditions. While various types of fault recorders are considered, particular emphasis is placed upon the interpretation of oscillograms. After study of this course and the associated workbook participants should be able to understand the following overall concepts and be able to apply them to their day-to-day work activities. They will also be able to answer related test questions on these subjects: Objectives of fault investigation and analysis, Disturbances, faults, power swings, Gathering of fault data (after the fact), Operational reports, relay targets, Sequence of event recorders (SOER), Oscillograms from digital relays, Features of oscillograph machines: Quick start, Pre-fault, Continuous, Starting sensors: Neutral overcurrent, Zero sequence voltage, Negative sequence voltage, Location of oscillographs on the power system, Selection of data to be monitored, Information available from oscillograms, The need to monitor carrier signals, Coordination of data from all sources for analysis, i.e. relay targets, operational reports, system one-line diagrams, oscillograms and SOERs. Interpretation of data.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00

 

Course Objectives

Learning Objectives:
- Trainees will be able to explain why it is necessary to conduct a post system disturbance investigation and analysis.
- Trainees will be able to describe common methods for gathering information for a post-disturbance investigation.
- Trainees will be able to describe common tools which are available to help with fault and disturbance analysis.
- Trainees will be able to describe the features of various types of automatic disturbance recording equipment and describe the conventional practice for locating this equipment on the power system.
- Trainees will be able to describe the types of data and its interpretation that should be recorded on oscillograms.
- Trainees will be able to describe major features of oscillograms produced by three common faults and misoperations.
- Trainees will be able to describe major features of oscillograms produced by three common equipment operating events.

 

Topics Covered

SEGMENT A - BUS CONFIGURATIONSEGMENT B - SUBSTATION SWITCHINGSEGMENT C - SUBSTATION EQUIPMENT

 

Prerequisites

n/a

 

End of Course Instructions

Congratulations on completing the course! Your credits earned on completion of this program will be reported to RCEP.net within 30 days of completion. Once we report your completion at RCEP.net, you will receive a certificate of completion provided by RCEP on the email address you have provided at the time of enrollment. Please keep the certificate for your record. You may be required to submit this certificate to the state to record your PDH or present it in case if you are audited. If you have any questions or concerns please contact customer service at http://www.360trainingsupport.com

 

Exams

After completing this course the final exam must be passed with a 70% or higher in order to receive certificate of completion.

Got questions? Contact us below or call 877-881-2235

Why Choose 360training.com?

  • Fast and easy courses completion
  • Get an education faster than at traditional colleges!
  • 100% online - No classroom attendance required.
  • Unlimited 24x7 online customer support
  • Over 500,000+ certified nationwide.