Combined Cycle Technologies Series 2505 Aero-Derivative Gas Turbines

2505 Aero-Derivative Gas Turbines

85.00 85.00
$85.00
PRICE PER USER
$
X
USERS


=
SUBTOTAL
$
  • Course Delivery: On Demand
  • Duration: 4 

Chat Live | Contact Us | Toll Free: (888) 360-8764

 

Description

The objective of this course is to highlight the main features of the aero-derivative type of gas turbine, drawing attention in particular to the difference when compared with the heavier industrial machines.

  • NERC CEH: 4
  • NERC OPS Hours: 4
  • NERC Standard Hours: 0
  • NERC Simulation Hours: 0
  • NERC PE Hours: 4
  • NERC EO Credits: 0
 

Course Objectives

Terminal Objective: The trainee shall describe design and construction features of an aero-derivative gas turbine.

  • Enabling Objective: The trainee shall describe the arrangement of major turbine parts, which include:
  • o Air compressors
  • o Diffuser
  • o Combustor
  • o Exhaust
  • Enabling Objective: The trainee shall describe the specific purpose of the diffuser, which includes:
  • o Reduction of air velocity prior to entrance into combustor
  • o Location between compressors and combustor
  • Enabling Objective: The trainee shall explain the effect of air velocity in combustor input.
  • Enabling Objective: The trainee shall explain the purpose of double-orifice fuel nozzles.
  • Enabling Objective: The trainee shall describe the flow path through double-orifice nozzle chamber relative to loads for each of the following:
  • o Lower loads -- fuel supply to center chamber
  • o Higher loads -- fuel supply to outer chambers
  • Enabling Objective: The trainee shall describe differences with heavy industrial types.
  • Enabling Objective: The trainee shall describe the approximate maximum output of a generator driven by an aero-derivative gas turbine.

Terminal Objective: The trainee shall describe the support systems (auxiliaries) to the aero-derivative gas turbine.

  • Enabling Objective: The trainee shall describe the lube oil system including:
  • o Approximate operating pressure at 45 psi
  • o Alarming low pressure at approximately 30 psi
  • Enabling Objective: The trainee shall describe the relationships between N2 speed and starting device engagement/disengagement.
  • Enabling Objective: The trainee shall explain the purpose of exhaust thermocouples.
  • Enabling Objective: The trainee shall list types of generator relay protection.
  • Enabling Objective: The trainee shall describe types of cooling systems.
  • Enabling Objective: The trainee shall describe the purpose of the air bleed valves in the casing between the low and high speed compressors.

Terminal Objective: The trainee shall describe the operator interfaces to the aero-derivative gas turbine.

  • Enabling Objective: The trainee shall state the approximate maximum average temperature (F) from the gas exhaust thermocouples the operator must control to prevent trip.
  • Enabling Objective: The trainee shall state the pressure that the start-pack compressed air system will alarm to the operator for low air pressure (approximately 200 psi).
  • Enabling Objective: The trainee shall describe the operator control panel for the aero-derivative gas turbine generator (unit).
  • Enabling Objective: The trainee shall describe the synchronizing control modes available to the operator.
  • Enabling Objective: The trainee shall describe which high pressure compressor speed is always indicated continuously on the operator control panel for a typical three shaft.
  • Enabling Objective: The trainee shall describe how alarms are typically displayed on the control label for the operator.
  • Enabling Objective: The trainee shall describe the function of the shutdown button relative to the N3 speed-load control.

Terminal Objective: The trainee shall describe the control and operation of the aero-derivative gas turbine-generator.

  • Enabling Objective: The trainee shall describe the start-up sequence of the aero-derivative gas turbine-generator.
  • Enabling Objective: The trainee shall describe the normal shutdown sequence for the aero-derivative gas turbine-generator.
  • Enabling Objective: The trainee shall explain the difference between an emergency trip and normal trip sequence for the aero-derivative gas turbine-generator.
  • Enabling Objective: The trainee shall explain the N3 speed that the operator would expect when the turbine generator is synchronized to a 60 Hz system.
  • Enabling Objective: The trainee shall explain what the temperature recorders monitor continuously for display to the operator.
 

Topics Covered

Lesson 1: Design and Construction

  • The Gas Generator
  • The Three-Shaft Machine
  • Combustion
  • Compressor Turbines

Lesson 2: Support Systems

  • The Starting System
  • The Lube-Oil System
  • The Fuel System
  • The Fire-Protection System
  • The Air- and Water-Wash Systems

Lesson 3: Operator Interface

  • The Turbine Control Panel
  • Indicators and Controls
  • Alarms and Trips 1
  • Alarms and Trips 2

Lesson 4: Control and Operation

  • Automatic Startup 1
  • Automatic Startup 2
  • Shutdown
  • Twin-Pack and Two-Shaft Machines
 

Regulatory Information

2505 Aero-Derivative Gas Turbines - No Regulator/ 360training.com

  • Name:
  • No Regulator/ 360training.com
  • Phone:
  • 888-360-8764
  • Fax:
  • Website URL:
  • http://www.360training.com/
  • Email Address:
  • Address:
  • 1381, Burnet Road, Suite 100, Austin, Texas, 78727.
  • City:
  • Austin
  • State:
  • TX
  • Zip:
  • 78727

2505 Aero-Derivative Gas Turbines - Registered Continuing Education Program RCEP

  • Name:
  • Registered Continuing Education Program RCEP
  • Phone:
  • 202-682-4338
  • Fax:
  • Website URL:
  • https://www.rcep.net/
  • Email Address:
  • [email protected]
  • Address:
  • American Council of Engineering Companies 1015 15th Street, NW.
  • City:
  • DC
  • State:
  • WA
  • Zip:
  • 20005-2605
 

Subject Matter Expert

This course is created and brought to you by 360training, a leading provider of accredited e-learning courses to working professionals through today's leading schools, associations and corporations. 360training's high-quality e-learning courses assist thousands of working professionals in a wide range of disciplines, helping them to succeed in today's marketplace, to renew licenses, to acquire certification or to prepare for a new profession.

This course was created by the instructional design staff of 360training in connection with field professionals whose many years of experience in adult educational theory and distance learning technology make the process of certification, compliance and training as convenient, engaging and cost-effective as possible.

If you have any requests for technical or instructional support, then please contact the 360training Support Department located in the HELP section of your account profile. Technical support inquiries are handled immediately; instructional support questions are answered within 24 business hours, with information provided by a qualified professional in your field through our network of subject matter experts.

 

End of Course Instructions

Upon successful completion of the course and the accompanying survey, you will get your certificate and, if appropriate, have your success reported to the relevant regulatory body.

NERC CE: If you selected this option at the course launch, your credits will automatically be reported for NERC CE through the NERC SOCCED reporting tool. In case of reporting failure, your credits would be manually reported within 48 hours. It is important to provide the correct License Number in order to obtain the completion certificate and get reported. You can also use this Certificate for PDH Reporting and reporting to any other Regulator (example PJM, etc.).

RCEP: If you selected this option at the course launch, you will NOT receive a certificate directly from the training page. Instead, your credits will be reported to RCEP and you would receive a certificate from them through email.

360training: If you selected this option at the course launch, you are seeking NO credit reporting. The training you are taking is for professional development only. You will receive a generic 360 certificate.

 

Quiz Information

You will not be required to pass the knowledge check questions to move on to the next lesson. These will not be counted as a grade, but each question gives you insight into what you should have learned and the sorts of things you'll need to remember moving forward.

 

Exams

The final exam must be passed successfully with 70% or higher in order to receive your certificate of completion.

Got questions? Contact us below or call 877-881-2235

Why Choose 360training.com?

  • Fast and easy courses completion
  • Get an education faster than at traditional colleges!
  • 100% online - No classroom attendance required.
  • Unlimited 24x7 online customer support
  • Over 500,000+ certified nationwide.