Combined Cycle Technologies Series 2508 Combined Cycle Operation

2508 Combined Cycle Operation

85.00 85.00
$85.00
PRICE PER USER
$
X
USERS


=
SUBTOTAL
$
  • Course Delivery: On Demand
  • Credit Hours: 4
  • Credit Type: Technical, Health and Safety, Engineering

Chat Live | Contact Us | Toll Free: (888) 360-8764

 

Description

The objective for this course is to present the main features of the Gas Turbine Combined Cycle, as employed for 'Power Generation', and 'Co-Generation' (process steam of gas to industry) The most common types of configurations are presented along with an examination of typical steam turbine arrangements. Operation and control of the combined unit is also discussed in some detail, with the exception of the HRSG which is demonstrated in course 2509.

  • NERC CEH: 4
  • NERC OPS Hours: 4
  • NERC Standard Hours: 0
  • NERC Simulation Hours: 0
  • NERC PE Hours: 4
  • NERC EO Credits: 0
 

Course Objectives

Terminal Objective: The trainee shall describe the heat recovery system associated with a combined cycle operation.

  • Enabling Objective: The trainee shall describe the typical gas turbine exhaust temperatures.
  • Enabling Objective: The trainee shall describe the typical gas mass flow rate expected.
  • Enabling Objective: The trainee shall describe the common arrangements for heat recovery systems.
  • Enabling Objective: The trainee shall explain the relationship between (a) exhaust gas temperature and volume and (b) steam production.
  • Enabling Objective: The trainee shall explain how the following components are integrated to form a combined cycle plant for each of the following:
  • o Gas turbine
  • o HRSG
  • o Steam turbine

Terminal Objective: The trainee shall describe the configuration of a complete combined cycle unit.

  • Enabling Objective: The trainee shall explain the function of each major component including:
  • o Gas turbine
  • o HRSG
  • o Steam turbine
  • Enabling Objective: The trainee shall describe the relative output capacities of the combined cycle unit components.
  • Enabling Objective: The trainee shall describe how temperatures, volumes, and efficiencies effect the outputs of the associated turbines.
  • Enabling Objective: The trainee shall explain how these systems are controlled for an efficient generation output.

Terminal Objective: The trainee shall describe the typical steam turbine arrangement for a combined cycle unit.

  • Enabling Objective: The trainee shall list types of steam turbines typically used in a combined cycle application.
  • Enabling Objective: The trainee shall describe the parts of the steam turbine.
  • Enabling Objective: The trainee shall describe the steam flow paths for the steam turbine.
  • Enabling Objective: The trainee shall describe the generator arrangement associated with the steam turbine.
  • Enabling Objective: The trainee shall describe typical generator protection.

Terminal Objective: The trainee shall describe steam turbine support systems.

  • Enabling Objective: The trainee shall describe steam turbine auxiliaries.
  • Enabling Objective: The trainee shall describe lube systems.
  • Enabling Objective: The trainee shall describe the condenser function.
  • Enabling Objective: The trainee shall describe cooling systems.

Terminal Objective: The trainee shall describe the typical combined cycle unit operation.

  • Enabling Objective: The trainee shall describe the start-up sequence for a combined cycle unit start.
  • o Enabling Objective: The trainee shall explain speeds, temperatues, and pressures that would be monitored on a typical combined cycle unit start.
 

Topics Covered

Lesson 1: Heat Recovery

  • Exhaust Heat Recovery
  • HRSG Sections
  • Amount of Exhaust Heat
  • Maintaining Steam Temperature

Lesson 2: Combined Cycle Configurations

  • Typical Configurations
  • Bypass Arrangements
  • Multiple Turbine Arrangements
  • Alternative Arrangements

Lesson 3: Steam Turbine Arrangements

  • Process Steam Arrangements
  • Larger Arrangements
  • Re-Heat Steam

Lesson 4: Steam Turbine Support Systems

  • The Condenser
  • Condenser Operation
  • Air Leakage

Lesson 5: Combined Cycle Operation and Startup

  • Raising Steam Pressure
  • Start-up Limitations
  • Typical Start-up
  • Start-up Preparations
 

Regulatory Information

2508 Combined Cycle Operation - Registered Continuing Education Program RCEP

  • Name:
  • Registered Continuing Education Program RCEP
  • Phone:
  • 202-682-4338
  • Fax:
  • Website URL:
  • https://www.rcep.net/
  • Email Address:
  • [email protected]
  • Address:
  • American Council of Engineering Companies 1015 15th Street, NW.
  • City:
  • DC
  • State:
  • WA
  • Zip:
  • 20005-2605
 

Subject Matter Expert

This course is created and brought to you by 360training, a leading provider of accredited e-learning courses to working professionals through today's leading schools, associations and corporations. 360training's high-quality e-learning courses assist thousands of working professionals in a wide range of disciplines, helping them to succeed in today's marketplace, to renew licenses, to acquire certification or to prepare for a new profession.

This course was created by the instructional design staff of 360training in connection with field professionals whose many years of experience in adult educational theory and distance learning technology make the process of certification, compliance and training as convenient, engaging and cost-effective as possible.

If you have any requests for technical or instructional support, then please contact the 360training Support Department located in the HELP section of your account profile. Technical support inquiries are handled immediately; instructional support questions are answered within 24 business hours, with information provided by a qualified professional in your field through our network of subject matter experts.

 

End of Course Instructions

Upon successful completion of the course and the accompanying survey, you will get your certificate and, if appropriate, have your success reported to the relevant regulatory body.

NERC CE: If you selected this option at the course launch, your credits will automatically be reported for NERC CE through the NERC SOCCED reporting tool. In case of reporting failure, your credits would be manually reported within 48 hours. It is important to provide the correct License Number in order to obtain the completion certificate and get reported. You can also use this Certificate for PDH Reporting and reporting to any other Regulator (example PJM, etc.).

RCEP: If you selected this option at the course launch, you will NOT receive a certificate directly from the training page. Instead, your credits will be reported to RCEP and you would receive a certificate from them through email.

360training: If you selected this option at the course launch, you are seeking NO credit reporting. The training you are taking is for professional development only. You will receive a generic 360 certificate.

 

Quiz Information

You will not be required to pass the knowledge check questions to move on to the next lesson. These will not be counted as a grade, but each question gives you insight into what you should have learned and the sorts of things you'll need to remember moving forward.

 

Exams

The final exam must be passed successfully with 70% or higher in order to receive your certificate of completion.

Got questions? Contact us below or call 877-881-2235

Why Choose 360training.com?

  • Fast and easy courses completion
  • Get an education faster than at traditional colleges!
  • 100% online - No classroom attendance required.
  • Unlimited 24x7 online customer support
  • Over 500,000+ certified nationwide.