Combined Cycle Technologies Series 2506 Gas Turbine Routine Maintenance

2506 Gas Turbine Routine Maintenance

65.00 65.00
$65.00
PRICE PER USER
$
X
USERS


=
SUBTOTAL
$
  • Course Delivery: On Demand
  • Duration: 2 

Chat Live | Contact Us | Toll Free: (888) 360-8764

 

Description

The objective of this course is to present the nature and purpose of different modes of maintenance, i.e., running, predictive, and preventive maintenance.

  • NERC CEH: 2
  • NERC OPS Hours: 2
  • NERC Standard Hours: 0
  • NERC Simulation Hours: 0
  • NERC PE Hours: 2
  • NERC EO Credits: 0
 

Course Objectives

Terminal Objective: The trainee shall describe what comprises a good gas turbine maintenance program.

  • Enabling Objective: The trainee shall describe the key good maintenance practices for gas turbines.
  • Enabling Objective: The trainee shall explain how maintenance intervals contribute to a good on-going (running) maintenance program.
  • Enabling Objective: The trainee shall describe the factors that significantly contribute to turbine deterioration.
  • Enabling Objective: The trainee shall list the typical objects of recurring maintenance inspection.
  • Enabling Objective: The trainee shall describe minimum daily inspection points.

Terminal Objective: The trainee shall describe the critical points of measurement for a gas turbine maintenance program.

  • Enabling Objective: The trainee shall explain how each measurement provides an indication of turbine state.
  • Enabling Objective: The trainee shall explain how turbine efficiency can indicate turbine maintenance needs.
  • Enabling Objective: The trainee shall describe how analysis of temperature and pressure trending (plotting) can be used as an indicator.
  • Enabling Objective: The trainee shall explain the purpose and use of heat rate data.
  • Enabling Objective: The trainee shall explain how vibration detection is used in a maintenance program.
  • Enabling Objective: The trainee shall describe chip detection monitoring and how it is used in maintenance decisions.
  • Enabling Objective: The trainee shall describe determinants in maintenance outage scheduling and in establishing maintenance inspection intervals.

Terminal Objective: The trainee shall describe how preventive maintenance is determined for a gas turbine.

  • Enabling Objective: The trainee shall describe the objective of a gas turbine preventive maintenance program.
  • Enabling Objective: The trainee shall list the typical scheduled maintenance tasks including:
  • o Inspection points
  • o Replacement tasks
  • o Repair
  • Enabling Objective: The trainee shall describe the main points of combustor inspection.
  • Enabling Objective: The trainee shall explain how a maintenance program can reduce turbine deterioration rates.
  • Enabling Objective: The trainee shall describe what contributes to good predictive maintenance decisions.

Terminal Objective: The trainee shall describe the key points of combustion inspection.

  • Enabling Objective: The trainee shall explain the purpose and use of the borescope.
  • Enabling Objective: The trainee shall describe the typical procedure for combustion inspection.
  • Enabling Objective: The trainee shall describe the analysis of inspection results.
  • Enabling Objective: The trainee shall describe the steps required in combustion section disassembly and reassembly.
 

Topics Covered

Lesson 1: Running Maintenance

  • Roles of Good Maintenance
  • Running Checks
  • Daily Routine

Lesson 2: Predictive Maintenance

  • Measurements and Trend Plots
  • Performance Testing
  • Ambient Corrections
  • Vibration Analysis 1
  • Vibration Analysis 2

Lesson 3: Preventive Maintenance

  • Planned Maintenance Schedule 1
  • Planned Maintenance Schedule 2
  • Factors Influencing Deterioration
  • Inspection Intervals

Lesson 4: Combustion Inspection

  • Good Maintenance Practices
  • Combustion Section Disassembly
  • Removal of Components

Lesson 5: Combustion Component Inspection

  • Inspection and Cleaning of Components
  • Combustion-Section Reassembly
  • Installation of Components
 

Regulatory Information

2506 Gas Turbine Routine Maintenance - No Regulator/ 360training.com

  • Name:
  • No Regulator/ 360training.com
  • Phone:
  • 888-360-8764
  • Fax:
  • Website URL:
  • http://www.360training.com/
  • Email Address:
  • Address:
  • 1381, Burnet Road, Suite 100, Austin, Texas, 78727.
  • City:
  • Austin
  • State:
  • TX
  • Zip:
  • 78727

2506 Gas Turbine Routine Maintenance - Registered Continuing Education Program RCEP

  • Name:
  • Registered Continuing Education Program RCEP
  • Phone:
  • 202-682-4338
  • Fax:
  • Website URL:
  • https://www.rcep.net/
  • Email Address:
  • [email protected]
  • Address:
  • American Council of Engineering Companies 1015 15th Street, NW.
  • City:
  • DC
  • State:
  • WA
  • Zip:
  • 20005-2605
 

Subject Matter Expert

This course is created and brought to you by 360training, a leading provider of accredited e-learning courses to working professionals through today's leading schools, associations and corporations. 360training's high-quality e-learning courses assist thousands of working professionals in a wide range of disciplines, helping them to succeed in today's marketplace, to renew licenses, to acquire certification or to prepare for a new profession.

This course was created by the instructional design staff of 360training in connection with field professionals whose many years of experience in adult educational theory and distance learning technology make the process of certification, compliance and training as convenient, engaging and cost-effective as possible.

If you have any requests for technical or instructional support, then please contact the 360training Support Department located in the HELP section of your account profile. Technical support inquiries are handled immediately; instructional support questions are answered within 24 business hours, with information provided by a qualified professional in your field through our network of subject matter experts.

 

End of Course Instructions

Upon successful completion of the course and the accompanying survey, you will get your certificate and, if appropriate, have your success reported to the relevant regulatory body.

NERC CE: If you selected this option at the course launch, your credits will automatically be reported for NERC CE through the NERC SOCCED reporting tool. In case of reporting failure, your credits would be manually reported within 48 hours. It is important to provide the correct License Number in order to obtain the completion certificate and get reported. You can also use this Certificate for PDH Reporting and reporting to any other Regulator (example PJM, etc.).

RCEP: If you selected this option at the course launch, you will NOT receive a certificate directly from the training page. Instead, your credits will be reported to RCEP and you would receive a certificate from them through email.

360training: If you selected this option at the course launch, you are seeking NO credit reporting. The training you are taking is for professional development only. You will receive a generic 360 certificate.

 

Quiz Information

You will not be required to pass the knowledge check questions to move on to the next lesson. These will not be counted as a grade, but each question gives you insight into what you should have learned and the sorts of things you'll need to remember moving forward.

 

Exams

The final exam must be passed successfully with 70% or higher in order to receive your certificate of completion.

Got questions? Contact us below or call 877-881-2235

Why Choose 360training.com?

  • Fast and easy courses completion
  • Get an education faster than at traditional colleges!
  • 100% online - No classroom attendance required.
  • Unlimited 24x7 online customer support
  • Over 500,000+ certified nationwide.