• Home
  • QOS-Implementing Cisco Quality of Service 2.5
Communications QOS-Implementing Cisco Quality of Service 2.5

QOS-Implementing Cisco Quality of Service 2.5


Date of Class:


Last Day To Enroll:

3295.00 3,295.00

  • Course Delivery: Virtual Classroom

Chat Live | Contact Us | Toll Free: (888) 360-8764



This course describes the need for QoS mechanisms in IP networks. It describes the two conceptual QoS models (Integrated Services and Differencetiated Services), basic technologies, Classification and Marking, Queuing Mechanisms, Traffic Shaping and Policing, Congestion Avoidance, Link Efficiency, Signaling Mechanisms, MQC, and IP over ATM. The course focuses on the DiffServ model. Who Should Attend The course is targeted at pre- and post-sales technical engineers responsible for designing, implementing, and/or troubleshooting QoS on a network. Also, those individuals that are working toward their CCIP certification.

Course Objectives

Implement the appropriate QoS mechanisms required to create an effective administrative policy providing QoS

Topics Covered

1. Introduction to QoS
  • Review Converged Networks
  • Understand QoS
  • Describe Best-Effort and Integrated Services Models
  • Describe the Differentiated Services Model
  • Module Summary
  • Module Self-Check

2. Implement and Monitor QoS
  • MQC Introduction
  • Monitor QoS
  • Define Campus AutoQoS
  • Define WAN AutoQoS
  • Module Summary
  • Module Self-Check

3. Classification and Marking
  • Classification and Marking Overview
  • MQC for Classification and Marking
  • NBAR for Classification
  • Use of QoS Preclassify
  • Campus Classification and Marking
  • Module Summary
  • Module Self-Check

4. Congestion Management
  • Queuing Introduction
  • Configure WFQ
  • Configure CBWFQ and LLQ
  • Configure Campus Congestion Management
  • Module Summary
  • Module Self-Check

5. Congestion Avoidance
  • Congestion Avoidance Introduction
  • Configure Class-Based WRED
  • Configure ECN
  • Describe Campus-Based Congestion Avoidance
  • Module Summary
  • Module Self-Check

6. Traffic Policing and Shaping
  • Traffic Policing and Shaping Overview
  • Configure Class-Based Policing
  • Campus Policing
  • Configure Class-Based Shaping
  • Configure Class-Based Shaping on Frame Relay Interfaces
  • Configure Frame Relay Voice-Adaptive Traffic Shaping and Fragmentation
  • Module Summary
  • Module Self-Check

7. Link Efficiency Mechanisms
  • Link Efficiency Mechanisms Overview
  • Configure Class-Based Header Compression
  • Configure LFI
  • Module Summary
  • Module Self-Check

8. Deploying End-to-End QoS
  • Apply Best Practices for QoS Policy Design
  • End-to-End QoS Deployments
  • Module Summary
  • Module Self-Check

Lab 1: Connection and Orientation to the Voice Lab Environment
Lab 2: Implementing Basic CUCM configurations and Cisco IP Phones
Lab 3: Implementing Cisco Unified Border Element (CUBE) for calls to and from the Actual PSTN
Lab 4: Case Study: QoS Mechanisms
Lab 5: Packet Generator Configuration
Lab 6: Lab 5: IP SLA Setup and QoS Baseline Measurement
Lab 7: Configuring QoS with Cisco AutoQoS
Lab 8: Case Study: Classification and Marking
Lab 9: Classification and Marking Using MQC
Lab 10: Using NBAR for Classification
Lab 11: Configuring QoS Pre-classify
Lab 12: Configuring Fair Queuing
Lab 13: Configuring LLQ-CBWFQ
Lab 14: Case Study: WRED Traffic Profiles
Lab 15 Configuring DSCP-Based WRED
Lab 16: Configuring Class-Based Policing
Lab 17 Configuring Class-Based Shaping


Cisco Certified Networking AssociateCCNA Routing and SwitchingICND1 v2.0 - Interconnecting Cisco Networking Devices, Part 1 ICND2 v2.0 - Interconnecting Cisco Networking Devices, Part 2

Got questions? Contact us below or call 877-881-2235

Why Choose 360training.com?

  • Fast and easy courses completion
  • Get an education faster than at traditional colleges!
  • 100% online - No classroom attendance required.
  • Unlimited 24x7 online customer support
  • Over 500,000+ certified nationwide.