It is important that you understand how to apply knowledge from your course work to real-world scenarios. Understanding how to properly apply your knowledge will enable you to carry out successful and safe operations. Safety is the top priority during any operation. The table-top scenarios provided throughout this course will help you develop safe practices in carrying out emergency and restoration operations. The table-top exercises use a simulated AGC system to introduce various system events to create an emergency response situation similar to those that occur in actual workplaces.
"Terminal Objective: The trainee shall demonstrate ability to mitigate loss of AGC Frequency input to a BA AGC system. BAL-001, BAL-003, BAL-005
- Enabling Objective: The trainee shall demonstrate understanding of AGC modes (TLB, CF/FF, CT/FT).
- Enabling Objective: The trainee shall demonstrate understanding of effect encountered upon loss of frequency source upon control.
- Enabling Objective: The trainee shall explain how frequency bias impacts AGC in NERC ACE algorithm.
Terminal Objective: The trainee shall demonstrate ability to mitigate loss of dynamic schedule in AGC control scheme.
- Enabling Objective: The trainee shall demonstrate knowledge of how dynamic transfer impacts associated BA areas.
- Enabling Objective: The trainee shall make any corrective action necessitated by cited occurrence.
Terminal Objective: The trainee shall demonstrate ability to mitigate voltage and reactive emergency. VAR-001
- Enabling Objective: The trainee shall take corrective action upon multiple line loss and voltage degradation to an electric utility with transmission, distribution, and embedded generation, which also serves as the BA.
- Enabling Objective: The trainee shall correctly select and initiate corrective action with existing reactive resources.
Terminal Objective: The trainee shall demonstrate ability to mitigate transformer bank fault at a key grid facility.
- Enabling Objective: The trainee shall recognize and correctly identify the relay protection that operated.
- Enabling Objective: The trainee shall take appropriate action to switch and clear the cited transformer.
9500 Exercise Instructions
Scenario 1: Table-Top Emergency Response Drill
Scenario 2: Table-Top Emergency Response Drill
Scenario 3: Table-Top Emergency Response Drill
Scenario 4: Table-Top Emergency Response Drill
9501 Emergency Table Top Drill, Part I - North American Electric Reliability Corporation (NERC)
- North American Electric Reliability Corporation (NERC)
- (609) 452-8060
- (609) 452-9550
- Website URL:
- Email Address:
- 116-390 Village Boulevard
Subject Matter Expert
This course was created by the instructional design staff of 360training in connection with field professionals whose many years of experience in adult educational theory and distance learning technology make the process of certification, compliance and training as convenient, engaging and cost-effective as possible.
If you have any requests for technical or instructional support, then please contact the 360training Support Department located in the HELP section of your account profile. Technical support inquiries are handled immediately; instructional support questions are answered within 24 business hours, with information provided by a qualified professional in your field through our network of subject matter experts.
You will not be required to pass the knowledge check questions to move on to the next lesson. These will not be counted as a grade, but each question gives you insight into what you should have learned and the sorts of things you'll need to remember moving forward.
The final exam must be passed successfully with 70% or higher in order to receive your certificate of completion.
Got questions? Contact us below or call 877-881-2235
Why Choose 360training.com?
- Fast and easy courses completion
- Get an education faster than at traditional colleges!
- 100% online - No classroom attendance required.
- Unlimited 24x7 online customer support
- Over 500,000+ certified nationwide.