Fear? Not If You Use OSHA 10 Safety Training The Right Way!
Construction workers are constantly exposed to serious occupational hazards (such as electric shocks, falls, repetitive motion injuries, scaffold collapse injuries etc) on worksites which can prove fatal. However, those risks can be reduced a great deal with OSHA 10 Safety Training. Here are some topics the training covers that can ensure construction workers remain safe.
Construction workers are constantly exposed to serious occupational hazards (such as electric shocks, falls, repetitive motion injuries, scaffold collapse injuries etc) on worksites which can prove fatal. Click To Tweet
- Scaffolding should be sturdy enough to support weight that is 4 times the maximum intended load. Plus, it should be installed on a solid footing.
- Scaffolding should not be supported with unstable objects such as loose bricks, barrels or boxes.
- Scaffolding should always be dismantled, installed and moved under the supervision of a competent worker.
- Aerial lifts and elevated platforms can be used to make elevated work spaces safer.
- Workers should be protected from roof edges and floors via guardrail systems complete with toe boards and warning lines. Control line systems can also work in this regard.
- Ladders should be long enough to reach elevated work areas
- Damaged ladders should be clearly marked, repairs, replaced or destroyed as soon as possible.
- Ladders should never be loaded more than their intended limit or more than the manufacturer’s rated capacity.
- Slippery stairs should be dried immediately to prevent slips and falls.
- The treads should cover the step and landing as well.
- Stairways should be clear of debris and other dangerous objects.
- Workers should be discouraged from entering an unprotected and unsupported trench.
- Trenches that are several feet deep should have a protective system in place.
- A registered and professional engineer must be employed to design an appropriate protective system for trenches that are 20 feet deep or more.