Mold Remediation in Schools and Commercial Buildings

Mold Remediation in Schools and Commercial Buildings
Indoor exposure to mold can trigger severe allergic reactions and cause serious health issues. It’s a cause of concern for schools and office buildings since it molds grow on almost any surface, including paper, wood, carpet, food and even insulation as long as there there is enough moisture and oxygen present for it to thrive. While eliminating mold and its spores indoors is impossible, its growth can be controlled. Mold spreads when it produces spores that cannot be seen with the naked eye. They may enter from the outdoors and thrive in enclosed areas that have a moist environment. When those spores land on damp areas, they begin to grow and ‘eat’ whatever they land on to survive.

Mold spreads when it produces spores that cannot be seen with the naked eye. Click To Tweet

Mold typically appears in schools and commercial buildings via HVAC systems which then proceed to spread it through every classroom. This can happen if air conditioners are not maintained regularly leading to moist conditions that offer an ideal environment for mold to populate. Both schools and commercial buildings are high traffic areas. Students and employees can easily bring mold spores in with them as they enter the premises. Plus, carpets are breeding grounds for this hazardous material. The material soaks up spilled juice, coffee, food, glue, vomit and anything moist that lands on it. These conditions lead to mold infestations which can also cause structural damage with time if allowed to spread. The obvious solution is to prevent water buildup in the building but due to budget constraints, such solutions are often ignored. Contrary to popular belief, a fresh coat of paint in rotting wood which is riddled with mold does nothing but hide the issue. Remediation is less costly than replacing an entire school. Regular inspections and maintenance can go a long way in preventing this hazardous material from materializing in the first place. Regular inspections can highlight issues that can otherwise lead to moist conditions such as leaking pipes and dirty ducts. The same is the case with commercial buildings which are equally susceptible to mold. Like schools, these structures can easily become breeding grounds for mold if HVAC systems are not maintained ore repaired in a timely manner. Systems that are not functioning properly or are too big/small for the space they are intended for can allow moisture buildup. As mold grows in those moist conditions, the HVAC system spreads the spores throughout every room in the building leading to a number of health issues.

Preventing Mold Growth

The good news is that mold growth can be prevented easily with these tips:
  • Fix sources of moisture as soon as possible.
  • All leaky faucets and pipes should either be replaced or fixed.
  • All drip pans should be kept clean and free of obstructions.
  • Reduce moisture levels in the air by repairing leaks and increasing air circulation.
  • Increase surface temperature by enhancing air circulation
  • Maintain low levels of humidity indoors – it should be less than 60% to prevent mold growth.
These were just some of the solutions you can use to prevent mold growth in schools and office buildings. By adhering to these you can reduce absenteeism or sick days significantly.

Mold Inspector Certification

As a mold inspector, you will be called to schools and commercial buildings to check for infestations on a regular basis. Get the certification and training you need to do a good job. The Mold Inspector Certification training course will give you everything you need to know about this hazardous material and how it affects health and air quality. This includes the necessity of PPE or personal protective equipment and the tools you need during the inspection process. The course details what you need to watch out for each area, how to access mold and sampling methods you can use to extract it for testing. Testing procedures and legal requirements are also covered in detail. You will also learn how to interpret the lab results you receive and what you need to do afterwards to remove the infestation. The course is based online so you can take it whenever you get the time to. Sign up for it today and get certified.  

Privacy Policy  |   Legal

©2021 360training

©2021 360training   Privacy Policy  |   Legal