About this Package
The Mechanical Series package consists of 74 half-hour courses that make up a complete training solution for the following topics:
- Bearing Maintenance
- Industrial Hydraulic Fundamentals
- Industrial Pneumatics Fundamentals
- Lubrication Concepts
- Mechanical Transmission Systems
- Pipes and Pipefitting
- Precision Measuring Instruments
- Pumps
- Rigging
- Shaft Alignment
- Static and Dynamic Sealing
- Valve Fundamentals
- Welding Fundamentals
This course bundle was designed for the following professions and to enhance the skills and knowledge necessary for these roles:
- Mechanical Engineers
- Maintenance Technicians
- Machinery Operators
- Manufacturing Professionals
- Industrial Maintenance Staff
- Plant Operators
- Facility Managers
- Maintenance Planners
- Process Technicians
- Industrial Mechanics
- Maintenance Supervisors
- Operational Maintenance Workers
- Equipment Maintenance Managers
- System Reliability Professionals
Package Facts
What You Get
Certificate of completion
Course Hours
37 hours
Learning Type
100% Online, Available 24/7
Course Structure
At your own pace, save progress as you go
Support
Support available by email, phone, or chat
Course Update
Content is updated and current
Package Includes
- Actuators Training
Duration Hours: 0.5
- Advanced Rigging I
Duration Hours: 0.5
- Advanced Rigging II
Duration Hours: 0.5
- Alignment Tools and Methods
Duration Hours: 0.5
- Basic Rigging I
Duration Hours: 0.5
- Basic Types and Operations I
Duration Hours: 0.5
- Basic Types and Operations II
Duration Hours: 0.5
- Basic Types and Operations III
Duration Hours: 0.5
- Bearing Fundamentals
- Bearing System Lubrication
Duration Hours: 0.5
- Belt Drives I
Duration Hours: 0.5
- Belt Drives II
Duration Hours: 0.5
- Belt Drives III
Duration Hours: 0.5
- Belt Drives IV
Duration Hours: 0.5
- Belt Drives Maintenance
Duration Hours: 0.5
- Bolted Joints I
Duration Hours: 0.5
- Bolted Joints II
Duration Hours: 0.5
- Brazing Training
Duration Hours: 0.5
- Centrifugal Pump Training
Duration Hours: 0.5
- Chain Drives I
Duration Hours: 0.5
- Chain Drives II
Duration Hours: 0.5
- Cross and Reverse Dial Alignment
Duration Hours: 0.5
- Dials Indicators
Duration Hours: 0.5
- Fixed Gauges
Duration Hours: 0.5
- Gas Metal Arc Welding (GMAW) Training
Duration Hours: 0.5
- Gas Tungsten Arc Welding (GTAW) Training
Duration Hours: 0.5
- Gaskets
Duration Hours: 0.5
- Gear Drives
Duration Hours: 0.5
- Gearbox Maintenance
Duration Hours: 0.5
- General Welding Safety Training
Duration Hours: 0.5
- Hydraulic Components I
- Hydraulic Components II
- Hydraulic Systems Training
Duration Hours: 0.5
- Hydraulic Theory
Duration Hours: 0.5
- Introduction to Welding
Duration Hours: 0.5
- Laser Alignment
Duration Hours: 0.5
- Lubricant Properties
Duration Hours: 0.5
- Machinery Lubrication
Duration Hours: 0.5
- Mechanical Seals
Duration Hours: 0.5
- Micrometers
Duration Hours: 0.5
- Moving the Machine
Duration Hours: 0.5
- Oxyacetylene Welding and Cutting (OAW) Training
Duration Hours: 1
- Oxyacetylene Welding and Cutting (One Module)
Duration Hours: 0.5
- Packing
Duration Hours: 0.5
- Pipe Hangers and Supports
Duration Hours: 0.5
- Pipe Insulation Training
Duration Hours: 0.5
- Piping & Tubing
Duration Hours: 0.5
- Piping Codes and Standards
Duration Hours: 0.5
- Piping Materials and Manufacturing Methods
Duration Hours: 0.5
- Pneumatic Components I
- Pneumatic Components II
Duration Hours: 0.05
- Pneumatic Systems
Duration Hours: 0.5
- Pneumatic Theory I
Duration Hours: 0.05
- Pneumatic Theory II
- Positive Displacement Pumps
Duration Hours: 0.5
- Precision Measuring Instruments Training
Duration Hours: 0.5
- Preventing Wear and Erosion
- Principles of Lubrication
Duration Hours: 0.5
- Pump Design
Duration Hours: 0.5
- Pump Maintenance & Repair Training
Duration Hours: 0.5
- Relief & Safety Valves I
Duration Hours: 0.5
- Relief & Safety Valves II
Duration Hours: 0.5
- Rim and Face Alignment
Duration Hours: 0.5
- Rolling Contact Bearings I
Duration Hours: 0.5
- Rolling Contact Bearings II
Duration Hours: 0.5
- Shielded Metal Arc Welding (SMAW) Training
Duration Hours: 0.5
- Sliding Surface Bearings
- Soft Foot and Bar Sag
Duration Hours: 0.5
- Special-Purpose Pumps
Duration Hours: 0.5
- Threaded Fasteners
Duration Hours: 0.5
- Torque and Tension
Duration Hours: 0.5
- Types and Effects of Shaft Misalignment
Duration Hours: 0.5
- Vernier Calipers
Duration Hours: 0.5
- Weld Joint Inspection
Duration Hours: 0.5
FAQs
When do my courses expire?
Your courses will expire one (1) year after you purchase them (the date you submit payment), unless the course itself indicates otherwise.
For more information about course expiration dates, please read our Terms of Use.
What if I need a refund for my training course?
If for some reason you are not happy and would like a refund, send us a request within 72 hours of purchase. Here are the eligibility requirements you must meet:
- Your purchase was made no more than 72 hours prior to your refund request.
- You have NOT:
- Attempted any portion of a test or exam.
- Requested or been issued a certificate of completion.
- Completed 50% or more of the purchased course.
If you meet all of these criteria, submit your refund request in writing via email to support@360training.com with a proof-of-purchase receipt and an explanation for why you are requesting a refund.
You can find more information about our refund policy here.
Customer Reviews
Buy in Bulk Across The Entire Course Catalog
360training's extensive course catalog includes over 6,000 courses in a variety of different industries. Browse our complete course catalog, select all the courses you need, and calculate your savings.
Buying for a Team or Group?
Interested in bulk discounts and flexible billing options on our expansive library of Industrial Skills courses? Connect with our Corporate Sales Executives today!
Upgrade your LMS to Include Manager-Level Access
- Assign Courses
- Tracking Employee Progress
- Maintain and Organize Records
Have a question or need help? Click here to start a chat with our support team.
