Missouri 2107 - Bus Protection

2107 - Bus Protection

85.00 85.00

  • Course Delivery: On Demand
  • Duration: 4 


The objective of this module is to review the different bus layouts that are used in power systems and to present the different protection schemes that are installed to protect against bus faults. After study of this course and the associated workbook the participant should be able to understand the following overall concepts and apply them to his/her day-to-day work activities. He/she will also be able to answer related test questions on these subjects: Features of different bus arrangements, Single breaker - single bus, Single buses connected with bus tie breaker, Main and transfer buses with single breaker, Single breaker - double bus, Double breaker - double bus, Ring bus, Breaker-and-a-half bus, Special problems of bus protection, The ground fault bus, Partial differential protection with overcurrent relays, Directional comparison schemes, Residual current differential schemes, CT saturation problems, Multi-restraint relays, Linear coupler, High impedance relays.

If you are taking this course for NERC credit, the following credits will be reported.

NERC CE HOURS: CE HOURS = 4.00 OPS Topics=4.00 Standards=0.00 Simulation=0.00 EO=0.00


Course Objectives

Learning Objectives:
- Trainees will be able to describe different bus arrangements used on power systems, and be able to explain the advantages and disadvantages of each.
- Trainees will be able to describe simpler forms of bus protection, of the type that would typically be used on a distribution substation.
- Trainees will be able to describe some of the problems that are particular to bus protection, including the wide divergence of current flows in different circuits with the resultant problems of CT accuracy.
- Trainees will be able to explain the need for high speed differential protection if a given bus is a strategic part of the power system.
- Trainees will be able to explain the problem associated with CT saturation and the need for multiple restraint coils on differential relays.
- Trainees will be able to describe what distinguishes a linear coupler from a normal CT and explain how linear couplers are used in protection schemes.
- Trainees will be able to describe the operation of high impedance differential relays.


Topics Covered






End of Course Instructions

Congratulations on completing the course! Your credits earned on completion of this program will be reported to RCEP.net within 30 days of completion. Once we report your completion at RCEP.net, you will receive a certificate of completion provided by RCEP on the email address you have provided at the time of enrollment. Please keep the certificate for your record. You may be required to submit this certificate to the state to record your PDH or present it in case if you are audited. If you have any questions or concerns please contact customer service at http://www.360trainingsupport.com



After completing this course the final exam must be passed with a 70% or higher in order to receive certificate of completion.


Why Choose 360training.com?

  • Fast and easy courses completion
  • Get an education faster than at traditional colleges!
  • 100% online - No classroom attendance required.
  • Online customer support
  • Over 500,000+ certified nationwide.